Berkey Water Filter vs Brita

It's that time of year again when everyone is thinking about getting their home ready for the holidays. This includes stocking up on supplies like water filters and softeners. If you are looking to buy a new filter or softener, there are many different options out there. 

Both Berkey and Brita water filters are great options for those looking for a quality water filter. Both filters have been proven effective in removing harmful contaminants from water, and both come with a lifetime warranty. However, there are a few differences between the two filters that should be considered when making a decision. So, which water filter is the best option: Berkey or Brita? 

The Cost of Berkey and Brita Filters

Berkey and Brita filters can vary depending on the type of filter and where it is purchased. Filters with a higher price are generally more effective at removing toxins and chemicals from water.

Filters with a lower price may be less effective but are typically cheaper. For example, if you purchase a $20 Berkey carbon block filter online, it will remove about 90% of contaminants in your drinking water. If you buy an identical filter that costs $10, it will remove roughly 70%.

The Capacity of Berkey and Brita Filters

Both Berkey and Brita filters have a capacity of 1,000 gallons. This means that they can filter up to 1,000 gallons of water before being replaced. However, the amount of time these filters last depends on how much water is filtered through them each day. A typical family uses approximately 100-200 gallons per person every day. Therefore, a single Berkey or Brita filter should last for several years.

The Weight of Berkey and Brita Filters

The Berkey water filter is on the heavier side, weighing in at just over 10 pounds when it comes to weight. On the other hand, the Brita water filter weighs just over 6 pounds. This could be a big factor to consider if you're looking for a water filter that you can take with you on the go. If this isn't an issue for you, either one will work fine.

Berkey Big Water Filter

The Filter Life of Berkey and Brita Filters

The filter life of Berkey and Brita filters will vary depending on the type of filter and how often it is cleaned. Generally, the filter life of a Berkey water filter is around six months, while a Brita water filter usually lasts around three months. It is important to clean the filter regularly to maintain its effectiveness. You should also check your filter's manual or contact the manufacturer directly to determine what cleaning method they recommend.

The Maintenance Requirements of Berkey and Brita Filters

The maintenance requirements of Berkey and Brita filters are similar. Both filters require the replacement of the filter cartridge every 2-4 months, depending on the type of filter. To clean the filters:

  1. Pour 1 cup of white vinegar into a quart-sized container and fill it three-quarters of the way with water.
  2. Swish the filter around in the vinegar and water mixture for about 10 minutes, then pour the mixture through the filter and rinse with fresh water.
  3. Dry the filter with a cloth.

The Taste of Water from Berkey and Brita Filters

Royal Berkey Water Filter

Both Berkey and Brita water filters come with various filters to suit different needs, including activated carbon, reverse osmosis, and ultraviolet light. However, both filters boast very similar results when it comes to taste. Both filters will remove all types of contaminants and chemicals from water, but the taste of the water will depend on the type of filter used.


After comparing the cost, capacity, weight, filter life, and maintenance requirements of Berkey and Brita filters, it is clear that Berkey filters are the better option. They are more expensive than Brita filters, but they have a longer life and remove more contaminants and chemicals from water. 

The Brita water filter is a great option for filtering your water. The purpose of Brita's products is to eliminate the taste and odor of chlorine, which is added to tap water to kill bacteria and reduce the level of sediments in the water, making it look cleaner. They also contribute to less plastic waste.

Berkey Water Filters are another great option for filtering your water. These filtration systems use gravity-fed technology that allows them to remove up to 99% of all contaminants from your drinking water, including heavy metals like lead, mercury, arsenic, cadmium, chromium, copper, nickel, zinc, barium, strontium, fluoride, nitrate, radon, pesticides, herbicides, pharmaceuticals, hormones, antibiotics, viruses, cysts, parasites, mold spores, yeast, E. coli, coliform, salmonella, giardia, cryptosporidium, and other pathogens.

Both Berkey and Brita water filters are great options for filtering your water. It depends on what is important to you and what you are looking for in a water filter.

What’s On Your Mind?

Older Post Newer Post

Added to cart!