Broward County Water and Wastewater Services (BCWWS) - 2A

Source Drinking water Assessment In 2017 the Florida Division of Environmental Safety performed a Resource Water Assessment upon our systems. The assessment was carried out to provide information about any kind of potential sources of contaminants in the vicinity of our water wells. There are three (3) potential sources of contaminants identified for the 1A system having a low susceptibility level, and nine (9) sources of contamination recognized for the 2A system with a low susceptibility level. Found in 2017, FDEP performed a Source Drinking water Assessment for the town of Hollywood which supplies water for the 3A and 3B/C systems; there are 13 (13) potential causes of contamination identified intended for the 3A/3BC devices with a low to moderate susceptibility level. The assessment answers are available on the FDEP Source Water Evaluation Protection Program site at dep. condition. fl. us/swap or perhaps they can be obtained from the town of Hollywood Drinking water Quality Division simply by calling (954) 921-3414. Softening At the drinking water treatment plant, the floor water is at first treated with lime green and ferric chloride to reduce hardness and color. During this stage of the treatment procedure, chemicals are added so that most of the firmness and particles inside the water can be very easily removed. Fluoridation Subsequent softening, fluoride is usually added for improved protection against tooth corrosion. Filtration Filtration is utilized following softening to help treat the melted water by eliminating the remaining particulate subject from the treated drinking water. Disinfection, which can be the final treatment stage, is accomplished by digging in chlorine and hydrogen, otherwise known as chloramines. A small amount (residual levels) of chloramines medical disinfectant is maintained through the distribution system to be able to control microbial growth. Dewatering Solids that settle out throughout the treatment process will be collected and driven to a settling pot, where they are thickened. The thickened shades are pumped into a vacuum filter, which usually removes excess drinking water. Monitoring Broward Region Water and Sewage (WWS) Services regularly monitors for pollutants in your drinking water in accordance with Federal and local regulations, rules, and rules. Except where suggested otherwise, this record is based on the outcomes of our monitoring intended from January 1 to Dec 31, 2017. Info obtained before January 1, 2017, and presented in this statement are from the latest testing done in compliance with the laws, tips, and regulations. A lot more than 15, 000 assessments are performed every year to comply with nationwide standards in WWS’ NELAP* certified water laboratory. WWS likewise employs certified drinking water treatment operators who also conduct more than 317, 000 process control tests annually. These types of tests ensure that water treated and sent to Broward County clients meets or exceeds all federal government requirements for a safe drinking water supply under the Safe Drinking Water Take action. The following provided desk lists the guidelines set by the A safe drinking water supply Act and the amounts detected in admissible water for Zones 1A, 2A, 3A, and 3B/C..

FAQs Home» About SCWD» FAQs Please click on a category or use our Search characteristic to browse our Frequently Asked Questions. Beach Closures Billing Customer Care General Hazardous and Household Waste Home Water System Maintenance Recycled Water Your Water Meter.